学校|图书馆
统一认证登录 | 登录 | English| RSS Feeds | Atom Feeds
中文版 | English
   注册
个人简历
科研成果
统计分析
访问统计
月访问量

0

  • 内部： 0

  • 外部： 0

  • 国内： 0

  • 国外： 0

年访问量

1343

  • 内部： 3

  • 外部： 1340

  • 国内： 1307

  • 国外： 37

总访问量

7550

  • 内部： 62

  • 外部： 7488

  • 国内： 7325

  • 国外： 225

访问量
访问量
1. Influence of tool and workpiece properties on the wear of the coun.. [413]
2. An investigation on the nano-abrasion wear mechanisms of KDP cryst.. [198]
3. Nanoindentation creep, elastic properties, and shear strength corr.. [196]
4. Tribological behavior of Ti–6Al–4V alloy: Subsurface structure, .. [192]
5. Advances in machining of particulate-reinforced metal matrix compo.. [183]
6. Predicting the evolution of sheet metal surface scratching by the .. [182]
7. Thermal oxidation and its effect on the wear of Mg alloy AZ31B [182]
8. A finite element study on the effects of densification on fused si.. [178]
9. Effect of the elastic deformation of rolls on the surface texture .. [177]
10. Interaction potential function for the deformation analysis of pot.. [176]
11. Structural anisotropy effect on the nanoscratching of monocrystall.. [176]
12. Elastic modulus evolution of rocks under heating–cooling cycles [170]
13. Mechanical properties and deformation mechanisms of surface-modifi.. [170]
14. An Investigation into the Texture Transfer in the Process of Lubri.. [163]
15. Advanced thermal metamaterial design for temperature control at th.. [161]
16. Effect of Anisotropy of Potassium Dihydrogen Phosphate Crystals on.. [159]
17. A new polymer-based mechanical metamaterial with tailorable large .. [158]
18. Microstructure-based three-dimensional characterization of chip fo.. [158]
19. Kinematic modeling of surface topography ground by an electroplate.. [158]
20. Characterization and criteria of phase transformations and lattice.. [157]
21. Surface texture transfer in skin-pass rolling with the effect of r.. [156]
22. Effect of repeated nanoindentations on the deformation of potassiu.. [156]
23. Characterization of Nanoscale Thermal Conductivity [155]
24. Mechanisms of the nanoscopic deformation of SiC and KDP [153]
25. An investigation on the friction, wear and deformation of potassiu.. [152]
26. A new discrete element model for rock-like materials [152]
27. Rapid Forming of Nanowire Array on Polyvinylidene Fluoride Polymer.. [150]
28. Temperature effect on the friction and wear of an Al-60Si alloy [149]
29. A note on the applicability of a constitutive model with acoustopl.. [148]
30. Multiscale Interface Stress Characterisation in Cold Rolling [144]
31. Characterization of mechanical properties and failure of potassium.. [144]
32. On the numerical modelling of composite machining [144]
33. A metamaterial for wearable piezoelectric energy harvester [142]
34. An Investigation into the Densification-Affected Deformation and F.. [142]
35. Ultrasonic vibration-assisted incremental sheet metal forming [138]
36. Consistent Computational Modeling of Mechanical Properties of Carb.. [137]
37. The Mechanics Characterization of Cutting Metal-Matrix Composites [135]
38. Fuzzy modelling of surface scratching in contact sliding [133]
39. Theoretical modelling of brittle-to-ductile transition load of KDP.. [133]
40. Densification effects on the fracture in fused silica under Vicker.. [133]
41. HD-lubricated high-speed small reduction rolling of hard steel str.. [131]
42. An analytical method for assessing the initiation and interaction .. [122]
43. A new lightweight deep neural network for surface scratch detectio.. [118]
44. Fracture mechanisms of intact rock-like materials under compressio.. [114]
45. Effect of abrasive grain position patterns on the deformation of 6.. [110]
46. Material removal mechanisms and characteristics of potassium dihyd.. [108]
47. Subsurface damage minimization of KDP crystals [108]
48. Surface integrity of Inconel 718 in electrical discharge grinding [101]
49. Debris effect on the surface wear and damage evolution of counterp.. [99]
50. A numerical strategy for predicting the interface stresses in meta.. [97]
51. Effects of grain size and protrusion height on the surface integri.. [91]
52. Morphology Measurements by AFM Tapping without Causing Surface Dam.. [90]
53. A multiscale soft-contact modelling method for rough surfaces in c.. [88]
54. Tribological performance of silicone oil based Al2O3 nano lubrican.. [84]
55. Experimental evaluation of a silicone oil as an oxidation inhibito.. [81]
56. Analytical grinding force prediction with random abrasive grains o.. [81]
57. Advances in machining of particulate-reinforced metal matrix compo.. [77]
58. Numerical insights into the effect of ITZ and aggregate strength o.. [76]
59. TEM-MD characterization of KDP deformation mechanisms under nanoin.. [74]
60. Mechanisms of the nanoscopic deformation of SiC and KDP [72]
61. Tribological behavior of eutectic Al–12Si alloy manufactured by s.. [67]
62. Effect of lubrication conditions on the acoustic emission behavior.. [67]
63. On the deformation mechanism of 6H-SiC under the nanogrinding of m.. [65]
64. Aggregate effect on the mechanical and fracture behaviours of conc.. [63]
65. On the deformation mechanism of SiC under nano-scratching: An expe.. [63]
66. Effect of interatomic potentials on molecular dynamics simulation .. [62]
67. Wear of mold surfaces: Interfacial adhesion in precision glass mol.. [60]
68. An investigation on the wear and subsurface deformation mechanism .. [59]
69. Blunting and wear of AFM tips during dynamic lithography [53]
70. Wear mechanism, subsurface structure and nanomechanical properties.. [52]
71. A data-driven approach to RUL prediction of tools [52]
72. Effects of temperature on the deformation of 6H–SiC during nanosc.. [46]
73. A novel auxetic unit cell for 3D metamaterials of designated negat.. [46]
74. Nano-machining by AFM dynamic lithography: the threshold of machin.. [42]
75. Design of low wear artificial hip joint considering 3D physiologic.. [41]
76. On the mechanical response and the corresponding mechanisms of SiC.. [41]
77. Tribological performance for an Mg alloy subjected to sliding at e.. [34]
78. A technique for making pore-gradient TPMS stainless-steel alloys b.. [33]
79. Manufacture and property characterization of interconnected pore-g.. [26]
80. Multiphysics Design of a Resonator Tuning System and Dimensionless.. [25]
81. On the deformation mechanism and dislocations evolution in monocry.. [24]
82. Effect of SiC particle content on the mechanical behavior and defo.. [8]
83. In-situ TEM investigation of dislocation healing and recrystalliza.. [2]
下载量
1. Morphology Measurements by AFM Tapping without Causing Surface Dam.. [2]
2. The Mechanics Characterization of Cutting Metal-Matrix Composites [2]
3. A technique for making pore-gradient TPMS stainless-steel alloys b.. [1]
4. On the mechanical response and the corresponding mechanisms of SiC.. [1]
Baidu
map